- - -
 
 
 
 
 
 
 
Array Trading engineering & technology systems
 
 

Βαλβίδες Εξαερισμού - ΥΛΙΚΑ ΔΕΞΑΜΕΝΩΝ

Ελληνικά English
 
PV/EL
 
Pressure and Vacuum Relief Valve
The PV/EL type PROTEGO® valve is a highly developed combined pressure and vacuum relief valve. It is primarily used as a device for relieving pressure and vacuum in tanks, containers, and process engineering equipment. The valve offers reliable protection against unallowable overpressure and underpressure. Product loss close to the set pressure is avoided and unallowable product entry is prevented.

The device will start to open as soon as the set pressure is reached and only requires 10% overpressure to full lift. Continuous investments in and a commitment to research and development have allowed PROTEGO® to develop a low pressure valve which has the same opening characteristic as a high pressure safety relief valve. This “full lift type” technology allows the valve to be set at just 10% below the maximum allowable working pressure or vacuum (MAWP or MAWV) of the tank and still safely vent the required mass flow. The opening characteristic is the same for pressure and vacuum relief.

Due to the highly developed manufacturing technology, the tank pressure is maintained up to the set pressure with a tightness that is far superior to the conventional standard. This feature is achieved by valve seats made of high quality stainless steel and with precisely lapped valve pallets (1) or with an air cushion seal (2) in conjunction with high quality FEP diaphragm. The valve pallets are also available with a PTFE seal to prevent the valve pallet from sticking when sticky products are used, and they enable the use of corrosive substances. After the overpressure is released or the vacuum is balanced, the valve re-seats and provides a tight seal.

The optimized fluid dynamic design of the valve body and valve pallet is a result of many years of research, resulting in a stable operation of the valve pallet, optimized performance, and reduced product losses.
Αποθηκεύστε τις Τεχνικες Προδιαγραφές Αποθηκεύστε τις Τεχνικές Προδιαγραφές
 
ΕΚΔΗΛΩΣΗ ΕΝΔΙΑΦΕΡΟΝΤΟΣ
PV/EL
 
 
 
επόμενο προϊόν
 
 
Φλογοφράκτες Βαλβίδες Εξαερισμού Εξοπλισμός & Υλικά Δεξαμενών
 
Newsletter
Εισάγετε το e-mail σας αν θέλετε να εγγραφείτε στην λίστα αλληλογραφίας μας.
Επικοινωνία
Κύπρου 75, Κορωπί 19400
Αθήνα, Ελλάδα
Τηλ. +30 210 9944685
Fax: +30 210 9969886

2o κατάστημα
Θερμοπυλών 1, 16344, Ηλιούπολη
Τηλ. +30 2110139581

E-mail: office@array.gr